Trapezoidal sheets T 85

T-85 load-bearing corrugated board - for the implementation of various construction projects

T-85 profiled sheet belongs to the category of the bearing. Its main purpose is the arrangement of the roof, as well as the creation of inter-floor ceilings for fixed formwork. It has a rib depth of 85mm. These protrusions give rigidity and resistance to various loads (wind, snow, mechanical influences). And the corrugated board is quite light. Therefore, it is often introduced into the construction projects of warehouses, pavilions, industrial enterprises, and retail outlets. By the way, the marking - T or H - speaks about the bearing properties of corrugated boards in Ukraine. These designations are the same in meaning.

The specifics of production and constructive sheets

Decking is made from steel sheets. The ribs on its surface are obtained by molding on machines. In order to protect the steel, a zinc layer is applied. As a result, the metal is more durable. It retains its original properties for decades. Because galvanized steel is not so prone to rust.

Colored corrugated board 85 makes a polymer coating. Several types of polymers are used. The profiled sheet is painted in colors according to the RAL palette. Moreover, the most popular shades are offered - 9001, 9002, 9006, 9010. Be sure to remember the number so that in the future you don’t have to guess what color you need to buy T-85. In finished form, the sheet may have a thickness of 0.7-1.25 mm. It is optimal to use something in between, for example, a profiled sheet of 1 mm.

Dimensions and correct calculation of material for construction projects

Separately, it is worth talking about the dimensions of the T-85 corrugated board. It, like other versions of the profiled sheet, has a width - full and useful, as well as a length - up to 12 m. Only the useful width is used for the calculation. Since the sheets are overlapped, it is calculated minus the distance of the lining. The corrugated board is cut in length. They do this in multiples, starting from 1 m. Think in advance which indicators are optimal for the implementation of your construction project and for transportation.

The advantages of a profiled sheet - obvious and secondary

Decking T-85 has a number of advantages:

• diversified purpose;
• long service life;
• ease of installation.

And it also has an affordable price. If we compare the price of corrugated board 85 and the price of materials with similar properties and purpose, then it will be an order of magnitude lower. And yes, it's easy to take care of. If a T-85 corrugated board is used outside, it is necessary to clean its surface from dust and dried dirt once a year. All you need is water and a soft brush or cloth. The profile located inside the premises can be cleaned more often, as needed, with the same means. If difficult soiling is present, add soapy water.

As mentioned earlier, load-bearing corrugated board T-85 is full-fledged roofing material. Since it is light in weight, rafters with a small section can be used, and the walls can be made not so thick. As a result, the weight of the building is reduced and the cost of its construction is also reduced. Rarely, when you have to use special equipment. And this is again an impressive saving on car rental and fuel for them.

Buying a profiled sheet - a step by step guide

To buy a T-85 corrugated board, you need to place an order on the website. To do this, call one of the numbers, write an e-mail or ask for feedback. The site managers will clarify all the details and, if necessary, give advice, and tell you more about the characteristics of corrugated board T-85. They will also help with organizing the delivery of the order in Ukraine - to Lviv, Dnipro, Kyiv and beyond.