Features
Profiling
Profiled decking S 10 is one of the most popular types of this material. The abbreviation "C" in its marking stands for "wall", 10 - as the height of the profile, 10 mm. It is used in the arrangement of fences, facade decoration, ceiling filing and wall cladding. Also, sheet assembly sandwich panels are made from it, collapsible partitions are made in industrial premises. The main advantages of C10 corrugated board are price, light weight, sufficient strength and ease of installation.
Profiled sheet 10 is produced from cold-rolled steel. A zinc coating is applied on top of it, so it becomes galvanized. And to provide additional protective and decorative properties, polyester, polyester, plastisol, printek are used. This makes corrugated board 10 colored, more aesthetic, resistant to various kinds of influences, and increases its service life. It is worth clarifying that the larger the layer of galvanized and polymer coating, the better. Optimal - 200 microns. Professional sheet S 10 can be processed on one, front side and on both sides - this option is optimal when arranging a fence. Shades of the material are standard - according to the RAL palette.
Decking S 10 combines, in fact, a whole group of profiled sheets with different metal thicknesses. It ranges from 0.3 to 0.7 mm. This material has a useful (mounting or working) width, as well as a full (total). They are respectively 1170 mm and 1200 mm. The maximum possible length of a S 10 corrugated sheet is 6 m. This must be taken into account, for example, when delivering. It will not be superfluous to also know the weight of the profiled sheet S 10. The fact is that the mass of one square meter differs slightly from the mass of one running meter. The thicker the sheet itself, the greater these differences.
By definition, S 10 corrugated board is wall, but it is sometimes used as a carrier. But it should be understood that such abilities are limited. The step between the supports is greatly reduced (the maximum allowable values are 1.2 m). Hence the name - corrugated board NS 10. If the profiled sheet 10 is not planned to be mounted on a wall or facade, but used as a roofing material for a pitched roof and if it is sloped less than 15 degrees, only a continuous crate is allowed. If its slope is greater, the crate pitch can be 300 mm. Therefore, S 10 is a corrugated board, which is used not only as a wall, but also as a roof. It's good strength and rigidity is due to the wave height of 10 mm. This makes corrugated board a suitable solution for fences and at the same time explains its frequent use for structures of greater complexity. Resistance to negative climatic conditions allows the use of this type of material before pouring buildings with concrete. And the light weight makes it possible to use the professional sheet C 10 in the manufacture of sandwich panels. It can also be bought for the reconstruction and modernization of buildings. It makes solid temporary structures, such as sheds, change houses or ceilings. If the possibilities of this type of material suit you, we recommend buying it with delivery in Ukraine. You can order a professional sheet C 10 in Kyiv, Dnipro, Lviv and other cities. The store staff will help you do this. And they will also advise on the characteristics of the HC 10 corrugated board, if the information provided is not enough.
© 2026, ТОВ "Алмет". All Rights Reserved.
